Product description
Coriolis Mass Flow Measuring System
The single-tube system with a "fit-and-forget" design: hygienic - drainable - complying with the requirements, codes and standards ASME BPE, ISPE, FDA, EHEDG, 3-A
Your benefits
The Promass measuring devices are suitable for use in PAT applications for the continuous monitoring of critical quality process variables such as mass flow, volume flow, density and temperature.
The uniform Proline transmitter concept includes software options for batching and concentration measurement for extended range of application.
The Promass sensors, tried and tested in over 100000 applications, offer:
- Material selected according to ASME BPE and BN2 guidelines, EN 1.4435/ASTM 316L, low delta ferrite
- Wetted surfaces: Ramax = 0.76 μm (30 μin.) or Ramax = 0.38 μm (15 μin) electropolished
- Accredited flow calibration according to ISO/SCS/IEC 17025/A2LA, traceable density calibration
- Fully welded sensor design, no seals or gaskets
- Electropolished exterior: "Hygienic design" for higher corrosion resistance and easier cleanability
- Complete drainability, even in horizontal lines
Field of application
The Coriolis measuring principle operates independently of physical fluid properties, such as viscosity and density.
- Extremely accurate measurement of liquids and gases found in Life Sciences Industries processes such as: Water purification, WFI, Fermentation processes, Media preparation, batch verification, batch fermenter, Sterilization process, cleaning agents and solvents. Fast recovery from CIP/SIP.
- Process up to +200 °C (+392 °F) and 63 bar (914 psi)
- Mass flow measurement up to 70 t/h (2570 lb/min)
Certification for highly regulated industries:
- ASME BPE Certificate of Compliance to relevant scope, 3A, EHEDG
- Inspection certificates: EN 10204, MTR for material, roughness, and delta ferrite.
Approvals for:
- ATEX, FM, CSA, TIIS, IECEx, NEPSI
- HART, PROFIBUS PA/DP, FOUNDATION Fieldbus, MODBUS
- Pressure Equipment Directive, SIL-2
Order information
Production time: Endress+Hauser works to a defined standard production time (from order entry to goods issue) depending on the variant of the Promass 80P.
Production times can be confirmed via your contact person or via the online shop.
Distribution:
Endress+Hauser will ship your order direct to your delivery address. In certain cases express or emergency shipments can be made on request.
Track & Trace:
Check your order status online using your reference number or the Endress+Hauser order confirmation number.
Spare Parts Logistics:
Spare parts are handled as standard products with a short standard delivery time. On request we deliver on shortest possible delivery time (extra charge).
