Levelflex M FMP45

Continuous Level Transmitter for

- Level Measurement in Liquids

- Interface Measurement in Liquids

Your benefits

• Measurement independent of product properties as:

  - density,

  - dielectric constant,

  - conductivity.

• Measurement is also possible in the event of foam or if the surface is very turbulent.

• Simple, menu-guided onsite operation with four-line plain text display.

• Easy remote operation, diagnosis and measuring point documentation with the free operating program supplied.

• Optional remote display and operation.

• Onsite envelope curve on the display for easy diagnosis.

• Electronics can be replaced without opening the tank.

• Application in safety related systems (overspill protection) with requirements for functional safety up to SIL 2 in accordance with IEC 61508/IEC 61511-1.

• Approvals:

  - Europe: ATEX,  PED, WHG, steam boiler EN12952-11/EN12953-9.

  - North America: FM, CSA, boiler act.

Level measurement

The Levelflex M is used for continuous level measurement of liquids.

FMP45 for highest of pressures and/or temperatures

• Temperature range:
  -200 °C (-328 °F)  to +400 °C (+752 °F).
• Pressure range: -1 to 400 bar (5802 psi).
• With second safety compartment: gas-tight glass feed though.
• Rod and coax probes up to 4 m (157"), rope probes up to 35 m (1378") measuring range.

The following interfaces are available for system integration:

• HART (standard) with 4 to 20 mA analog,
• PROFIBUS PA,
• FOUNDATION Fieldbus.

Interface measurement

Continuous measurement of interfaces between two liquids with very different dielectric constants, such as in the case of oil and water for example.

• Measurement independent of density, conductivity and temperature.
• Electronics version for the simultaneous measurement of the level of interfaces and the total level in liquids. The HART with 4 to 20 mA analog protocol is available for system integration
• Special version for the measurement of the level of interfaces at a constant total level. The PROFIBUS PA and FOUNDATION Fieldbus protocols are available for system integration.

Production time:
Endress+Hauser works to a defined standard production time (from order entry to goods issue) depending on the variant of the Levelflex M FMP45.
Production times can be confirmed via your contact person or via the online shop.

Distribution:
Endress+Hauser will ship your order direct to your delivery address. In certain cases express or emergency shipments can be made on request.

Track & Trace:
Check your order status online using your reference number or the Endress+Hauser order confirmation number.

Spare Parts Logistics:
Spare parts are handled as standard products with a short standard delivery time. On request we deliver on shortest possible delivery time (extra charge).